Unlocking GEO Zones
Self-Unlocking is intended for unlocking Authorization Zones. To complete Self-Unlocking,
you must submit an unlocking request via the DJI FlySafe website at https://y-
safe.dji.com. Once the unlocking request is approved, you can synchronize the unlocking
license through the DJI Pilot 2 app. To unlock the zone, alternatively, you can launch or y
the aircraft directly into the approved Authorization Zone and follow the prompts in DJI
Pilot 2 to unlock the zone.
Custom Unlocking is tailored for users with special requirements. It designates user-
dened custom ight areas and provides ight permission documents specic to the
needs of dierent users. This unlocking option is available in all countries and regions and
can be requested via the DJI FlySafe website at https://y-safe.dji.com.
Unlocking on Mobile Device: Run the DJI Pilot 2 app and tap GEO Zone Map on the home
screen. View the list of the unlocking licenses and tap
to view details of the unlocking
license. A link to the unlocking license and a QR code will be displayed. Use your mobile
device to scan the QR code and apply to unlock directly from the mobile device.
• To ensure ight safety, the aircraft will not be able to y out of the unlocked
zone after entering it. If the Home Point is outside the unlocked zone, the
aircraft will not be able to return home.
Flight Altitude and Distance Limits
Max altitude restricts the ight altitude of the aircraft, while max distance restricts the
ight radius around the Home Point of the aircraft. These limits can be changed in the DJI
Pilot 2 app for improved ight safety.
1. Max Altitude
2. Home Point (Horizontal Position)
3. Max Distance
4. Height of aircraft when taking o
Strong GNSS Signal
Flight Restrictions Prompt in DJI Pilot 2 App
Max Altitude
Altitude of the aircraft cannot ex-
ceed the value set in DJI Pilot 2.
Max ight altitude reached.
DJI Matrice 4 Series User Manual
16 © 2025 DJI All Rights Reserved.
To Next Page
Loading...
