Method 2: Using App
1. Power on the aircraft and the remote controller.
2. Run DJI Pilot 2 and tap Link Remote Controller to link. The status LED of the remote
controller blinks blue, and the remote controller will beep during linking.
3. Press and hold the power button of the aircraft for at least ve seconds. The aircraft
beeps, and its battery level LEDs blink in sequence to indicate it is ready to link. The
remote controller will beep twice, and its status LED will turn solid green to indicate
linking is successful.
• Make sure the remote controller is within 0.5 m of the aircraft during linking.
• Make sure the remote controller is connected to the internet when logging in
using a DJI account.
5.9 HDMI Settings
The touchscreen can be shared to a display after connecting the HDMI port of the remote
controller.
The resolution can be set by entering
> Display > HDMI.
DJI Matrice 4 Series User Manual
56 © 2025 DJI All Rights Reserved.
To Next Page
Loading...
