dji MATRICE 4 Series - Preparing the Aircraft; Activation

3.3 Preparing the Aircraft
1. Remove the gimbal protector from the camera.
2. Unfold the front arms.
3. Unfold the rear arms.
4. Install the Intelligent Flight Battery.
5. Match the propellers to motors. Press the propellers down and rotate until they click
in place.
B A
A B
3.4 Activation
The aircraft and remote controller require activation before using for the rst time. Press,
and then press again and hold the power button to power on the devices. Follow the
DJI Matrice 4 Series User Manual
20 © 2025 DJI All Rights Reserved.