dji MATRICE 4 Series - Notices; Flight Data

2. Make sure the computer is connected to the internet and the DJI device is powered
on.
3. Launch DJI Assistant 2 and log in with a DJI account.
4. Tap the rmware update on the left side of the main interface.
5. Select the rmware version and click to update. The rmware will be downloaded and
updated automatically.
6. When the "Update successful" prompt appears, the update is completed, and the DJI
device will restart automatically.
Notices
• Make sure the aircraft and remote controller are fully charged before updating
the rmware.
• DO NOT remove accessories or turn o the devices during the update process.
• The battery rmware is included in the aircraft rmware. Be sure to update all
batteries.
• During the update process, it is normal for the gimbal to go limp, the aircraft
status indicators to blink, and the aircraft to reboot. Wait patiently for the
update to complete.
• Make sure to keep the aircraft away from people and animals during a rmware
update, system calibration, or parameter conguration.
• For safety, make sure you are using the latest rmware version.
• After the rmware update is completed, the remote controller and the aircraft
may become disconnected. Reconnect the devices if necessary.
8.3 Flight Data
Flight data is automatically recorded to the internal storage of the aircraft. You can
connect the aircraft to a computer via the USB port and export this data via DJI Assistant 2
or DJI Pilot 2 app.
DJI Matrice 4 Series User Manual
94 © 2025 DJI All Rights Reserved.