dji MATRICE 4 Series - Installing the DJI Cellular Dongle 2

• DO NOT cut the SIM card by yourself, otherwise the SIM card may be damaged,
or the rough edges and corners may cause the SIM card to be unable to be
inserted or removed properly.
• If the SIM card is set with a password (PIN code), make sure to insert the SIM
card into the smartphone and cancel the PIN code setting, otherwise it will fail to
connect to the Internet.
• Open the cover and push the nano-SIM card to partially eject it.
Installing the DJI Cellular Dongle 2
1. Install the DJI Cellular Dongle 2 on to the aircraft.
1
2
2. Install the DJI Cellular Dongle 2 to the remote controller.
1
3
2
2
1
1
2
3
3. Check the icon in the upper right corner of the system desktop. If the 4G logo
appears, it means that the enhanced transmission is available.
• Gently remove the DJI Cellular Dongle 2 from the aircraft as shown if needed.
DO NOT pull the antennas by force. Otherwise, the antennas may be damaged.
DJI Matrice 4 Series User Manual
96 © 2025 DJI All Rights Reserved.