dji MATRICE 4 Series - Flight Environment Requirements

Flight Restrictions Prompt in DJI Pilot 2 App
Max Distance
The straight-line distance from
the aircraft to the Home Point
cannot exceed the max ight dis-
tance set in DJI Pilot 2.
Max ight distance reached.
Weak GNSS Signal
Flight Restrictions Prompt in DJI Pilot 2 App
Max Altitude
• Altitude is restricted to 60m
from the takeo point if light-
ing is sucient.
• Altitude is restricted to 3m
above the ground if lighting
is not sucient and the 3D in-
frared sensing system is func-
tioning.
• Altitude is restricted to 60m
from the takeo point if light-
ing is not sucient and the 3D
infrared sensing system is not
functioning.
Max ight altitude reached.
Max Distance No limit
• Each time the aircraft is powered on, the altitude limit will be automatically
removed as long as the GNSS signal becomes strong (GNSS signal strength ≥
2), and the limit will not take eect even if the GNSS signal becomes weak
afterwards.
• If the aircraft ies out of the set ight range due to inertia, you can still control
the aircraft but cannot y it any further away.
2.3 Flight Environment Requirements
1. DO NOT y in severe weather conditions such as strong winds, snow, rain, and fog.
2. Only y in open areas. Tall buildings and large metal structures may aect the
accuracy of the onboard compass and GNSS system. After takeo, make sure you
are notied with the voice prompt that the Home Point is updated before continuing
ight. If the aircraft has taken o near buildings, the accuracy of the Home Point
cannot be guaranteed. In this case, pay close attention to the current position of
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 17