dji MATRICE 4 Series - Live Mission Recording

Tap to save the ight route. After the ight route is saved, the icon becomes the
perform task button, tap the button and then check the settings and status of the
aircraft in the pop-up checklist. Tap to upload the ight route. Once the upload is
complete, tap the Start button to perform the current task.
Live Mission Recording
2
3
4
1
1. Control the gimbal, adjust the zoom scale, and aim at the subject. Tap to capture
photos or press the C1 button of the remote controller to add a waypoint. The
number of waypoints and photos will be added accordingly.
2. The number of planned waypoints.
3. The number of planned photos.
4. Tap to switch to map view for editing or viewing.
AI Spot-Check
Live mission recording supports AI Spot-Check. By selecting the target object in photos of
the ight route, the aircraft will accurately take photo for the same object during its next
ight.
When recording the ight route, it is recommended to place the target into the target
selection box. When editing the ight route, select Drag-Select Target to enter the AI
Spot-Check editing page.
DJI Matrice 4 Series User Manual
74 © 2025 DJI All Rights Reserved.