dji MATRICE 4 Series - Set Altitude

the mapping area's base. The points will automatically snap to the target points,
making the drawing quicker and more accurate.
• Make sure there is enough space when aircraft is performing tasks. Avoid
performing tasks in narrow spaces between buildings or in areas with many
trees.
• The mapping surface should be non-reective and have rich texture. Avoid
mapping glass walls.
• Make sure RTK is connected during the entire process of planning and
performing Geometric Route. Otherwise, the function cannot be used.
Set Altitude
1. In the camera view, y the aircraft to the required bottom and top base of the AR
measured object. Press C1 button on the remote controller to record the altitude of
the bottom base and C2 to record the altitude of the top base.
2. Tap
to conrm the mapping aea.
DJI Matrice 4 Series User Manual
82 © 2025 DJI All Rights Reserved.