1. Current photo number and total number of photos.
2. The device used to take the photo.
3. Photo thumbnail. Tap to perform AI Spot-Check editing for this photo. Photos
requiring AI Spot-Check will have a frame mark.
4. Enable/disable AI Spot-Check for the current photo.
5. Target selection box. You can adjust the box size, drag or rotate the box.
6. Save the ight route.
• AI Spot-Check can only be used with a zoom camera and requires taking photos
within 10x zoom range.
• AI Spot-Check should be used when RTK is enabled, and the RTK base station
coordinates for taking photos and re-ight must remain consistent.
Area Route
Area route has Ortho Collection and Oblique Collection, the aircraft can automatically
complete the data collection for the aerial photogrammetry of the planned area along the
s-shaped route according to the route parameters.
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 75
To Next Page
Loading...
