dji MATRICE 4 Series - Laser Rangefinding; Primary Flight Display

Laser Rangending
1
4
5
6
2
3
1. Tap to enable the RNG.
2. The cross hair in the center of the lens will turn red, which means the laser
rangender is aiming at the target and measuring the altitude of the target and
distance between the target and the aircraft. The latitude and the longitude of the
target can be obtained after a PinPoint is created on the target.
3. The linear distance between the target and the aircraft.
4. The altitude of the target.
5. The latitude and longitude of the target.
6. The horizontal distance between the target and the aircraft.
• RNG positioning is limited by factors such as the GNSS positioning accuracy
and gimbal attitude accuracy. The GNSS position, horizontal distance, navigation
display, and AR projection are provided for reference only.
• The shape of the cross hairs varies with dierent camera lenses.
Primary Flight Display
After enlarging the vision assist view, the ight assistance functions will be displayed on
the screen.
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 65