dji MATRICE 4 Series - Flight Operations; Annotation Management and Synchronization; Pinpoint

7 Flight Operations
7.1 Annotation Management and Synchronization
PinPoint
PinPoint can be used to set the location point of a subject in gimbal camera view or map
view, for quick observation and information synchronization.
4
1
2
3
5
1. Create a PinPoint
Adjust the attitude of the aircraft and the gimbal to move the subject to the center of
the current view. Press the L3 button of the remote controller to pin the subject at the
center. The PinPoint can record the latitude, longitude and altitude of the subject.
2. AR projection will be created for the subject in gimbal camera view or FPV camera
view. It will be big when near, small when far.
3. Selected PinPoint
• A small frame will appear around the PinPoint, indicating it is selected.
• The lower left corner of the Navigation Display shows the horizontal distance from
the PinPoint to the aircraft and the name of the PinPoint. The orientation of the
PinPoint relative to the aircraft is also shown within Navigation Display.
DJI Matrice 4 Series User Manual
68 © 2025 DJI All Rights Reserved.