◆
Flying near obstacles with small surface areas (e.g., tree branches, and
power lines).
• Keep the sensors clean at all times. DO NOT scratch or tamper with the sensors.
DO NOT use the aircraft in dusty or humid environments.
• The vision system cameras may need to be calibrated after being stored for
an extended period. A prompt will appear in DJI Pilot 2 and calibration will be
performed automatically.
• DO NOT y when it is rainy, smoggy, or the visibility is lower than 100m.
• DO NOT obstruct the sensing system.
• Check the following each time before takeo:
◆
Make sure there are no stickers or any other obstructions over the glass of
the sensing system.
◆
Use a soft cloth if there is any dirt, dust, or water on the glass of the sensing
system. DO NOT use any cleaning product that contains alcohol.
◆
Contact DJI Support if there is any damage to the lenses of the sensing
system.
• The aircraft can y at any time of the day or night. However, the vision system
becomes unavailable when ying the aircraft in low-light environments. Fly with
caution.
Vision Assist
The vision assist view, powered by the vision systems, changes the image on the view
from the corresponding vision sensors according to the ight speed direction to help
users navigate and observe obstacles during ight.
• When using vision assist, the quality of the video transmission may be lower
due to transmission bandwidth limits, cell phone performance, or the video
transmission resolution of the screen on the remote controller.
• It is normal for propellers to appear in the vision assist view.
• Vision assist should be used for reference only. Glass walls and small objects
such as tree branches, electric wires, and kite strings cannot be displayed
accurately.
• Vision assist is not available when the aircraft has not taken o or when the
video transmission signal is weak.
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 47
To Next Page
Loading...
