Adjust Flight Route Parameters
After the ight route is generated, tap on the Route Viewer to adjust the route
parameters. Refer to the Collecting Aerial Photogrammetry Data section for more
information about route parameters.
Tap Adjust Mapping Area to readjust the mapping area, if necessary.
Smart 3D Capture
Smart 3D Capture uses a rough model of the subject to generate three-dimensional
ight routes for precise photography. This allows for close-range data collection near the
surface of the subject. It is mainly used for modeling and inspecting complex building
facades, detailed ancient architecture, and geological disaster scenarios.
Click the link below or scan the QR code to watch the tutorial video before rst time use.
https://enterprise.dji.com/matrice-4-series/video
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 83
To Next Page
Loading...
