dji MATRICE 4 Series - Appendix; Specifications; Firmware Update; Aircraft and Remote Controller Firmware Update

8 Appendix
8.1 Specications
Visit the following website for specications.
https://enterprise.dji.com/matrice-4-series/specs
8.2 Firmware Update
Using DJI Pilot 2
Aircraft and Remote Controller Firmware Update
1. Power on the aircraft and remote controller. Ensure the aircraft is linked to the remote
controller, and the remote controller is connected to the internet.
2. Run DJI Pilot 2. A prompt will appear on the homepage if new rmware is available.
Tap to enter the Firmware Update view.
3. Tap Update All, and DJI Pilot 2 will download the rmware and update the aircraft and
remote controller.
4. The aircraft and remote controller will automatically restart after the rmware update
is complete.
• The devices installed on the aircraft will be updated to the latest rmware
version.
Oine Firmware Update
An oine rmware package can be downloaded from the DJI ocial website to an
external storage device such as a microSD card or U disk. Run DJI Pilot 2, tap HMS, and
then Firmware Update > Oine Update to select the rmware package of the remote
controller, aircraft, or payload from the external storage device and tap Update All to
update.
Using DJI Assistant 2 (Enterprise Series)
Aircraft and Remote Controller Firmware Update
1. Connect the aircraft or remote controller to a computer separately, as the DJI
Assistant 2 does not support updating multiple DJI devices at the same time.
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 93