12. Divide the airspace for ight when multiple aircrafts are operating simultaneously in
order to avoid collision mid-air.
Starting/Stopping the Motors
Starting the Motors
Perform one of the Combination Stick Commands (CSC) as shown below to start the
motors. Once the motors have started spinning, release both sticks simultaneously.
Stopping the Motors
The motors can be stopped in two ways:
Method 1: When the aircraft has landed, push the throttle stick down and hold until the
motors stop.
Method 2: When the aircraft has landed, perform one of the CSC as shown below until
the motors stop.
DJI Matrice 4 Series User Manual
22 © 2025 DJI All Rights Reserved.
To Next Page
Loading...
