dji MATRICE 4 Series - Wide-Angle Camera View; Thermal Camera View

18. PinPoints
19. Map View
20. PinPoint Function
Press the L3 button on the remote controller to add a PinPoint in the center of the
screen. Press and hold on the L3 button to expand the PinPoint settings panel.
21. Press the L1/L2 button on the remote controller to switch the camera lens.
22. Customizable Function Bar
Tap to access more functions, and it supports custom panels.
Wide-Angle Camera View
This section mainly sets out the dierences with zoom camera. Refer to the Zoom Camera
View section for more details.
1
1. Zoom Frame
After switching to the wide-angle camera as the main view, the zoom frame will
display the eld of view and camera zoom ratio.
Thermal Camera View
This section mainly sets out the dierences with zoom camera. Refer to the Zoom Camera
View section for more details.
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 63