dji MATRICE 4 Series - Annotation Sharing; Intelligent Functions; Poi

Annotation Sharing
The location of the target point identied by PinPoint can be synchronized with the
camera view, Navigation Display, map view, and DJI FlightHub 2. It can be displayed on
both camera and map views.
When connected to DJI FlightHub 2, the point, line and area annotations of DJI Pilot 2
app and DJI FlightHub 2 can be synchronized with each other. Locations and annotations
can be viewed on the remote controller and other devices logged into DJI FlightHub 2 for
real-time sharing.
7.2 Intelligent functions
DJI Matrice 4 Series Support multiple intelligent ight modes such as Smart Track, Cruise,
and features such as AI-based object detection and observation data record.
Click the link below or scan the QR code to watch the tutorial video before rst time use.
https://enterprise.dji.com/matrice-4-series/video
POI
After enabling the POI mode, the aircraft ies around the selected PinPoint in a circle,
making it convenient for users to take orbit shots. POI can be enabled only when the
aircraft is in Normal mode.
In POI mode, if the vision systems are working normally, the aircraft will brake when an
obstacle is detected, regardless of whether obstacle avoidance is set to Avoid or Brake.
Usage
1. After takeo, select an existing PinPoint from the camera view or the map view or
create a new PinPoint after nding the subject.
2. Manually control the aircraft to adjust the radius.
3. Tap the POI icon in the camera view to enable the POI mode. The aircraft looks at
the selected PinPoint automatically.
DJI Matrice 4 Series User Manual
70 © 2025 DJI All Rights Reserved.