dji MATRICE 4 Series - Set Waypoints

Set Waypoints
1
2
3
4
5
67
9
8
1. Enable/Disable Editing Waypoint on Map
2. Reverse Path
Tap to swap the start and end points to reverse the ight path. S refers to the start
point.
3. DeleteSelected Waypoint
4. Point of Interest (POI)
Tap to enable the POI function, and a POI will be displayed on the map. Drag to adjust
its position. After a POI is added, the aircraft yaw can be set as facing the POI, so that
the aircraft nose points at the POI during the task. Tap this icon again to disable the
POI function.
5. Flight Route Information
6. Individual Waypoint Settings
7. Parameters List
8. Flight Route Settings
These parameters will take eect for all waypoints in the route.
9. Save
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 73