Stopping the Motors Mid-Flight
• Stopping the motors mid-ight will cause the aircraft to crash.
The Combination Stick Command (CSC) can be used to stop the motors once the ight
controller detects critical error during ight.
Controlling the Aircraft
The control sticks of the remote controller can be used to control the aircraft movements.
The control sticks can be operated in Mode 1, Mode 2, or Mode 3, as shown below.
The default control mode of the remote controller is Mode 2. In this manual, Mode 2
is used as an example to illustrate how to use the control sticks. The more the stick is
pushed away from the center, the faster the aircraft moves.
Mode 1
Mode 2
DJI Matrice 4 Series User Manual
© 2025 DJI All Rights Reserved. 23
To Next Page
Loading...
