EasyManua.ls Logo

dji MATRICE 4 Series - Page 60

dji MATRICE 4 Series
109 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Displays the current orientation of the aircraft, with 0 degrees as North on the
compass.
4. Home Point and Remote Controller Orientations
Displays the position of the Home Point (yellow H) and the remote controller (blue
dot) relative to the aircraft.
If the remote controller and the Home Point are close to each other, only the
Home Point will be displayed.
The remote controller dot features an arrow to indicate the orientation. If the
signal is weak during ight, adjust the remote controller's direction so that the
arrow points towards the aircraft.
5. Home Point Distance
Displays the horizontal distance between the Home Point and the aircraft.
6. PinPoint Information
Displays the name of the PinPoint and the horizontal distance from the aircraft to the
PinPoint, when PinPoint is enabled.
7. Waypoint Information
Displays the name of the waypoints, the horizontal distance from the aircraft to the
waypoint, and the ascending or descending trajectory of the ight route, during a
ight route.
8. RNG Target Point Information
Displays the horizontal distance from the aircraft to the target point, when the RNG
laser rangender is enabled.
9. Vertical Obstacle Sensing Information
Once an obstacle is detected in the vertical direction, an obstacle bar icon will appear.
When the aircraft reaches the warning distance, the icon will glow red and orange,
and the remote controller will emit long beeping sounds. When the aircraft reaches
the obstacle braking distance, the icon will glow red, and the remote controller will
emit short beeping sounds. Both the obstacle braking distance and the warning
distance can be set in DJI Pilot 2. Follow the prompted instructions in the app to set
them. The white line shows the position of the aircraft in three seconds. The higher
the vertical speed, the longer the white line.
Horizontal Obstacle Sensing Information
The light areas are the obstacle sensing areas of the aircraft, while the dark areas are
the blind spots. During ight, keep the aircraft speed vector line out of the obstacle-
sensing blind spots.
DJI Matrice 4 Series User Manual
60 © 2025 DJI All Rights Reserved.

Table of Contents

Related product manuals