DMP Electronics XTLtouch Programming Guide

5 XTLtouch Series Programming Guide | Digital Monitoring Products
INITIALIZATION
Initialization allows you to set the XTLtouch back to its factory defaults. After selecting YES to clear a memory option,
the XTLtouch asks if you’re sure you want to clear that option’s memory. This safeguards you against accidentally
deleting current programming. Programming isn’t cleared from XTLtouch until you answer YES to SURE? YES NO.
INITIALIZATION
Press a select area.
CLEAR ALL CODES
NO: Leaves existing user codes intact.
YES: Clears the user code memory and assigns User Code 99 to User 99.
CLEAR ALL SCHEDULES
NO: Leaves existing schedules intact.
YES: Clears all schedules from the XTLtouch.
CLEAR EVENTS
NO: Leaves existing events intact.
YES: Clears all events held in the Display Events buer.
CLEAR ZONE PROGRAMMING
NO: Leaves existing zone information intact.
YES: Sets all zones in the system to unused.
CLEAR COMMUNICATION
NO: Leaves existing communication and messaging intact.
YES: Resets communication and messaging to factory defaults.
CLEAR WI-FI
NO: Leaves existing Wi-Fi programming intact.
YES: Resets Wi-Fi to factory defaults.
SET TO FACTORY DEFAULTS
Only use this function when the network primary controller is missing or inoperable.
NO: Leaves the remainder of the existing panel programming intact.
YES: Sets the XTLtouch back to factory defaults and clears all Favorites. Selecting yes
does not clear event memory, zones, user codes, or schedules.
INITIALIZATION
Press CMD to move to the FAST PROGRAM menu.
INITIALIZATION
CODES? NO YES
SURE? YES NO
SCHEDS? NO YES
SURE? YES NO
EVENTS? NO YES
SURE? YES NO
ZONES? NO YES
SURE? YES NO
COMMS? NO YES
SURE? YES NO
WIFI? NO YES
SURE? YES NO
DEFAULTS? NO YES
SURE? YES NO
INITIALIZATION

DMP Electronics XTLtouch Specifications

General

Brand	DMP Electronics
Model	XTLtouch
Category	Security System
Language	English