14 XTLtouch Series Programming Guide | Digital Monitoring Products
REMOTE OPTIONS
Remote Options allows you to program the XTLtouch for Remote Command and Remote Programming operation using
the Wi-Fi network.
REMOTE OPTIONS
Press a select area.
REMOTE KEY
This option allows you to enter a 1 to 8-digit code to verify the authority of an alarm or
to allow remote connections to perform a remote command/programming session. The
receiver must give the correct key to the XTLtouch before being allowed access to it. All
XTLtouch panels are shipped from the factory with the Remote Key preset as blank.
To enter a new Remote Key, press any select area and enter any combination of up to
eight digits.
REMOTE DISARM
Select YES to allow the panel to be disarmed remotely. Selecting NO disables remote
disarming. The default is YES.
APP KEY (FOR EASYCONNECT ONLY)
Press a select area and enter the 8-digit App Key obtained in DMPDealerAdmin.
com. This communication option is used to eliminate the need for a static IP address
programmed in Network Options. The default is blank.
REMOTE OPTIONS
RMT KEY:
DISARM NO YES
APP KEY: * * * * * * * *
To Next Page
Loading...
