47 XTLtouch Series Programming Guide | Digital Monitoring Products
Trac Count - Provides the number of zone trips per area for Night and Exit type zones in a disarmed state.
Zone Audit Days - Number of days allowed to elapse without a zone being tripped before a message is sent.
Receiver Routing - This selects the routing option for Auxiliary 1 or Auxiliary 2 zone types.
Style - The abbreviations that display on the keypad for arming zone style. TGL = Toggle,
ARM = Arm only, DIS = Disarm only
STEP = Wireless arming, MNT = Maintain
Common Keypad Messages
Message Meaning Possible Solutions
INVALID CODE
The user code you have entered is not recognized by the
system.
Check the user code and try again.
CLOSING TIME The schedule has expired but the system has not been
armed.
Users still on the premise should arm the system or extend the schedule
to a later time.
KEYPAD NAME - NOPWR Wireless keypad is not getting proper power. Check that AC/DC transformer is plugged in correctly.
AC TROUBLE The system AC is low or missing. Check that the AC connections are good.
BATTERY TROUBLE The System battery is either low or missing. Check that the battery connections are good and the battery is still good.
SYSTEM TROUBLE or
SERVICE REQUIRED
There is a problem with one or more components in the
system.
Press the RESET button for 1-2 seconds.
SYSTEM BUSY
The system is performing another task with a higher
priority.
Wait a few moments for the system to complete the task. If the message
displays for a long period of time, the processor could be locked up.
TRANSMIT FAIL
The panel has attempted to communicate with the central
station 10 times and has not succeeded.
Verify your communication type, account number, and IP address.
ENTER CODE (When entering
Programming)
A lockout code has been programmed for the panel. Enter the lockout code.
To Next Page
Loading...
