DMP Electronics XTLtouch - Z-Wave Device Management; Adding Z-Wave Devices; Viewing Z-Wave Devices; Removing Z-Wave Devices

22 XTLtouch Series Programming Guide | Digital Monitoring Products
AUXILIARY 1
Defines Bell Action for Auxiliary 1 Type Zones. The default is N.
AUXILIARY 2
Defines Bell Action for Auxiliary 2 Type Zones. The default is N.
CARBON MONOXIDE (CO)
Defines Bell Action for Carbon Monoxide (CO) Zone Types. The default is set at 4.
ZONE MONITOR OUTPUT
Defines Bell Action for Zone Monitor Zone Types. The default is set at N.
AUXLRY 1 TYPE: N
AUXLRY 2 TYPE: N
CO TYPE: 4
ZN MNTR TYPE: 4