EasyManuals Logo

DMP Electronics XTLtouch Programming Guide

DMP Electronics XTLtouch
58 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
31 XTLtouch Series Programming Guide | Digital Monitoring Products
LED OPERATION
This only displays when programming a panic or pendant transmitter. Select YES to
turn a panic or pendant LED on during normal operation. Select NO to turn the LED
o during normal operation. The LED always operates on all transmitters when the
transmitter case is open and the tamper is faulted. Default is YES.
DISARM/DISABLE
Select YES to disable the Zone Tripped message from 1101/1102/1106 Universal
Transmitters (Verison 108 or higher software), 1103 Universal Transmitters (Version 107
or higher software), or 1122/1126/1127 PIRs during the disarmed period. When disarmed,
the transmitter or PIR only sends Supervision, Tamper, and Low Battery messages to
extend transmitter battery life. For transmitters, a Zone Tripped message is sent if the
zone remains tripped for 20 seconds. Leaving the panel defaulted to NO causes the
panel to always send Zone Tripped messages in addition to Supervision, Tamper, and
Low Battery.
WIRELESS PIR PULSE COUNT
This option displays for 1122, 1126, and 1127 Wireless PIRs. Select the number of infrared
pulse counts (2 or 4) the PIR will use before sending a short message. The first infrared
pulse starts a timer and count. If no additional infrared pulses occur in 25 seconds, the
timer and count are reset. Default is 4.
WIRELESS PIR SENSITIVITY
This option displays for 1122, 1126, and 1127 Wireless PIRs. Select the sensitivity setting
for the PIR. Selecting LOW sets the PIR to operate at 75% sensitivity for installations in
harsh environments. Selecting HIGH sets the PIR to maximum sensitivity. Default is LOW.
PET IMMUNITY
This option displays for the 1122 Wireless PIR Motion Detector. Select whether or not to
enable pet immunity. Selecting YES allows pet immunity for animals up to 55 pounds.
NEXT ZONE
Select YES to return to the ZONE NO: - option to program a new zone. Select NO to
display the Alarm Action option.
WIRELESS PIR
PULSE COUNT: 4
WIRELESS PIR
SENSITIVITY: LOW
WIRELESS PIR PET
IMMUNITY: NO YES
NEXT ZN NO YES
LED OPER NO YES
DISARM DISABLE
NO YES

Table of Contents

Other manuals for DMP Electronics XTLtouch

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the DMP Electronics XTLtouch and is the answer not in the manual?

DMP Electronics XTLtouch Specifications

General IconGeneral
BrandDMP Electronics
ModelXTLtouch
CategorySecurity System
LanguageEnglish

Related product manuals