43 XTLtouch Series Programming Guide | Digital Monitoring Products
This displays the cellular signal strength of the nearest tower for the SIM card carrier. The
▐
’s represent the signal
strength 0-7. Select YES to continue through the remaining component tests. Select NO to stop testing and return to the
COMM STATUS option.
Successful Display Failure Display
CONNECTED
CONNECT ERROR
NOT ACTIVATED
COMM PATH GOOD NO ACK RECEIVED
Wireless Results:
Successful Display Failure Display
LINK OK LINK ERROR
DHCP OK DHCP ERROR
GATEWAY FOUND NO GATEWAY
DEST FOUND NO DESTINATION
COMM PATH GOOD NOT CONNECTED
NO ACK RECEIVED
Cellular Signal Strength (CELL SIGNAL)
This option provides a way to test the cellular signal strength of the nearest tower for the cellular carrier. Press any select
area to display cell signal strength. The X’s represent the numerical value of the cell signal strength in -dBm. The
▐
’s
represent the signal strength 0-7.
265 Series Activation
Cellular service is required before you can use cellular communications with the XTLtouch for single transmission. DMP
cellular communicators come ready for activation with SecureCom™ Wireless, LLC. To begin cellular activation, verify the
MEID number or SIM number has been added to the panel by using Remote Link™, the Dealer Admin Site
(dealeradmin.securecomwireless.com), the Tech APP™, or by calling DMP Customer Service (1-866-266-2826). For
complete activation instructions, refer to documentation in the Product Library at dmp.com.
Wi-Fi Signal Strength (Wi-Fi SIGNAL)
This option tests the signal strength of the selected SSID. Press any select area to display Wi-Fi signal strength. The
▐
’s
represent the signal strength 0-7.
Wi-Fi Signal Strength
Number of Bars Indication
7
Good Signal (Excellent for consistent operation)6
5
4
Average Signal (Expect consistent operation)3
2
1 Weak Signal (Will not operate reliably. Relocate Wi-Fi
equipment or add a Wi-Fi extender for better reception.)
0 No Signal
To Next Page
Loading...
