DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 13 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
When someone attempts to access a screen that is password protected, the screen shown in figure 2.4 will
appear (see important note below). Several of the setup & configuration screens of the CL96 require entry of
an administrative password. Factory service screens require entry of a service password - see section 7.
2.5 USB Storage
The CL96 uses a removable USB drive to store historical information including concentration logging, event
history, configuration information, and TWA data. USB storage drives may be purchased through DOD
Technologies – see Appendix A.
IMPORTANT : Once a password is entered it remains active for up to 1 minute from entry so that
it does not need to be repeatedly entered when switching between screens. Please remember
that anyone using the touch screen may access restricted screen locations during this time if the
machine is left unattended.
NOTE : The administrative password is included on a separate page shipped with your unit. It is
suggested that you remove the page and keep it in a safe and secure place. If you forget or lose
your password, please contact DOD Technologies, Inc. You can change the passwords on the
menu in the “Setup” area – see chapter 6. See Chapter 8 for contact information.
To Next Page
Loading...