DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 79 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
• Multiple external cabinets can be daisy-chained using the bottom RJ-45 connector as a starting point
for the second shielded cable.
Figure G.3.1
G.4 Wiring Output Modules
G.4.1 Analog (4-20 ma) Output Wiring
See Appendix B.4 for information on wiring to analog output modules.
G.4.2 Beckhoff Form A Relays
See Appendix B.3 for information on wiring to Beckhoff Relay Modules.
G.4.3 Form C Relay Wiring
The form C relay modules (blue) are labeled inside the external cabinet as shown below.
Figure G.4.1
To Next Page
Loading...