DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 69 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
Appendix C – System Specifications
The CL96 is designed for safe use under the following conditions
• Indoor use only
• Altitude up to 2,000 m
• Temperature 5ºC - 40 ºC
• Maximum relative humidity 80% for temperatures up to 31 ºC decreasing linearly to 50% relative
humidity at 40 ºC.
• A/C power as specified below with +/- 10% of the nominal voltage
• Transient Levels: Impulse withstand (overvoltage) category II of IEC 60364-4-443
WARNING :The detachable power cord or the supply line wiring must meet the
rating specified below .
CL96 System Specification
Height: 59” (+10” for tubing)
Width: 31” (+9 for wiring)
Depth: 28.5 “
Weight: 450pbs. (fully loaded), (Max shipping weight 600lbs)
A/C Power:
(North American Models)
120V ~ 60 Hz ~ 3 A
(European Models with Option Part #2-800-002)
230V~ 50 Hz ~ 3A
IP Rating: IP2x
IK Code: IK08 (European Models with Option Part #2-800-002)
To Next Page
Loading...