DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 21 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
5.3 Initialization
When the CL96 is powered on it will begin with an initialization screen which is followed by the automatic
restart screen (figure 5.3)
Figure 5.3
If the operator touched another menu button before the timer reaches 0 the machine will go to that screen and
WILL NOT enter analysis (unless of course the operator touched the analysis button). If the machine should
lose power at any time it will return to this screen when power is restored an automatically reenter analysis
when the timeout is reached.
To Next Page
Loading...