DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 34 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
6.1.e.5 Help -> About
Selecting the ‘About’ tab from the ‘Help’ menu displays the screen shown below. This screen contains
important system details including the version, license number, serial number and more.
Note: Certain references in the photo above have been altered or omitted for proprietary purposes. Details and
references will vary by system.
6.1.f Setup
Pressing the Setup button while in analysis will end the analysis cycle on all installed analyzers if the proper
password is entered. Touching the Setup button on the main menu will bring up the Setup sub-menu – see
section 6.2 below.
6.2 Setup Sub-Menu
The setup sub-menu contains the configuration screen for the CL96 necessary for normal operation. Access to
the Setup sub-menu is password protected (see section 6.2.f).
To Next Page
Loading...