DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 42 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
6.2.d Setup -> Configure
When the Configure button is touched the screen below is displayed. Each of the blocks on the screen are
described below.
Figure 6.2.d
Logging Configuration
Three components make up the logging configuration of the system: Where to log, what to log, and how often
to log. The drop-down list at the top will contain the available USB storage drives installed. Below the selected
drive is the information on the space available for logging.
To Next Page
Loading...