DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 8 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
1.3 Sampling and Monitoring
The system draws sample flow simultaneously from all installed points. Part of the sample flow is diverted
across the ChemLogic tape where it is analyzed. Each 16-point analyzer exhausts through a single port.
1.3.1 Flow Connections
Flow connections consist of “quick-connect” ports on the top and side of the CL96 unit. There are ninety-six
inlets, one for each monitored point, and 12 exhaust outlets, one for each analyzer.
1.4 Electrical Connections
“Knockout panels” for external electrical connections are provided on the right side of the CL96.
To Next Page
Loading...