DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 22 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
Chapter 6 The Main Menu
6.1 Main Menu
The main menu allows the operator to start/stop analysis and access to all information available while
remaining in Analysis.
6.1.a Analysis
As the name implies, touching the ‘Analysis’ button will start the CL96 analysis for all active points. (see Setup
in section 6.2.a). Figure 6.1.a.1 shows a 16-point system with analysis active. Note that the menu background
is green indicating analysis active and all points are green indicating no flow problems or gas alarms active.
Black points indicate that the points are not installed or are inactive on the CL96.
To Next Page
Loading...