DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 23 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
Figure 6.1.a.1
The color of each point on the analysis screen will change according to the current state of the point:
Disabled, Idle, Analyzing, Maintenance fault, or Alarm. (see colors in table 5.2)
Ex: Figure 6.1.a.2 displays which point 9 on analyzer A would look like when a full-scale reading is found while
monitoring for H2SE(0-500ppb).
Figure 6.1.a.2
To Next Page
Loading...