DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 44 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
6.2.e Setup -> Date Time
When the Date/Time button is touched the below is displayed. After adjusting the correct date and time on the
screen be sure to touch the ‘Set’ button to save the settings.
Figure 6.2.e
6.2.f Setup-> Passwords
When the Passwords button the password entry screen will be displayed. Note that the Administrator
password is required to access the screen.
To Next Page
Loading...