DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 20 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
Table 5.2
• Table 5.2 lists the colors in priority from lowest to highest since only 1 color will be displayed at a time.
For example, if any channel indicates a Gas Alarm the menu will appear red until the gas is no longer
detected or the alarm is cleared. If any point has a low flow the menu will appear yellow, etc.
• On the main menu you can access any of the screens on the menu without exiting analysis except the
‘Setup’ button which will exit analysis and bring up the Setup sub-menu. Note that the ‘Setup’ button
may require a password depending on the configuration of the CL96.
• Items with a down arrow next to them (such as ‘History’ in figure 5.2.1) indicates that the button will
bring up a sub-menu of screen selections.
• When a sub-menu is selected the new menu will replace the previous menu and will always include the
‘BACK’ button at the start which will return to the previous menu (see figure 5.2.2).
• Note in figure 5.2.2 the background color is yellow indicating a Maintenance fault (see section xx).
Figure 5.2.2
To Next Page
Loading...