DOD Technologies ChemLogic CL96 - Page 82

DC-TEC-MAN-CL96_B
DODtec.com
REV 1/9/2024 815-788-5200
Page 82 solutions@dodtec.com
ChemLogic® CL96 Operating Manual
Offset
(Words)
#
Words
Data Description Format
0
2
Connection Status
2
96
Concentration levels for all 96 points
Conc * 10 (eg. 23 = 2.3 actual conc)
98
1
Analyzer A Alarm Level 1 Indicators
Bit 0 - 15 = Alarm Level 1 points 1-16
99
1
Analyzer A Alarm Level 1 Indicators
Bit 0 - 15 = Alarm Level 1 points 17-32
100
1
Analyzer B Alarm Level 1 Indicators
Bit 0 - 15 = Alarm Level 1 points 1-16
101
1
Analyzer B Alarm Level 1 Indicators
Bit 0 - 15 = Alarm Level 1 points 17-32
102
1
Analyzer C Alarm Level 1 Indicators
Bit 0 - 15 = Alarm Level 1 points 1-16
103
1
Analyzer C Alarm Level 1 Indicators
Bit 0 - 15 = Alarm Level 1 points 17-32
104
1
Analyzer A Alarm Level 2 Indicators
Bit 0 - 15 = Alarm Level 1 points 1-16
105
1
Analyzer A Alarm Level 2 Indicators
Bit 0 - 15 = Alarm Level 1 points 17-32
106
1
Analyzer B Alarm Level 2 Indicators
Bit 0 - 15 = Alarm Level 1 points 1-16
107
1
Analyzer B Alarm Level 2 Indicators
Bit 0 - 15 = Alarm Level 1 points 17-32
108
1
Analyzer C Alarm Level 2 Indicators
Bit 0 - 15 = Alarm Level 1 points 1-16
109
1
Analyzer C Alarm Level 2 Indicators
Bit 0 - 15 = Alarm Level 1 points 17-32
110
1
Faults/Alarms Analyzer A
*See Below
111
1
Faults/Alarms Analyzer B
*See Below
112
1
Faults/Alarms Analyzer C
*See Below
113
1
Faults/Alarms CL96
*See Below
The Fault/Alarms are indicated as follows:
• Bit 0 – Critical Fault
• Bit 1 – General Fault
• Bit 2 – Alarm Level 1
• Bit 3 – Alarm Level 2
• Bit 4 – Analysis Active
• Bit 5 – Power
• Bit 7 – Heartbeat
For Analyzer A, B, and C the lower 8 bits (0-7) are for the lower analyzer and the upper 8 bits (8-15) are for the
upper analyzer. For the CL96 Fault/Alarms the alarms indicate the status of the entire machine. See Appendix
B for details of the I/O indicators.
The bits for Alarm Level 1, Alarm level 2, and all Fauly/Alarms may be affected by the “Energized
Faults/Alarms” setting of the CL96.