Resetting to factory settings via a USB storage device
Create a file folder at the root of a USB device, and name it factory-reset. If creating a file, there should
be no file extension. Plug the storage device into the USB port on the back of the CP950/CP950A, wait one
minute, and then reboot the unit. The system generates a log report cp950_logs.tgz file and a
dolbyAtmosConfiguration.dac backup file and saves these files to your USB device. Then, the system
resets to factory settings.
Performing USB functions
Dolby Cinema Processor CP950 and Dolby Atmos Cinema Processor CP950A Manual 39
Issue 9 Part Number 8800298 19 January 2022
To Next Page
Loading...
