3.1.4 Engine oil
Remove the oil drain plug of oil pan and pour the engine
oil into the prepared vessel.
3.1.5 Cooling fan
Remove the flange fixing bolts, then take off the flange
and cooling fan.
3.1.6 Belt
Loosen the tension adjusting bolts of the alternator and
the idle pulley, and take off the belts.
3.1.7 Thermostat
Loosen the rubber hose connected to the cooling water
pipe and remove the thermostat.
Remove the rubber hose of the bypass line.
5ton Diesel Engine SPC000006
Page 31
To Next Page
Loading...
