Doosan DISD SD 310 - Page 266

WK-Valve :
Remove components.
Loosen two socket head screws and fix shiftcontrol
housing provisionally, using a Special Tool ( S ).
Now, loosen the remaining socket head screws and
separate shift-control housing (is spring-loaded)
from the valve body by uniform loosening of the nuts
( S ).
( S ) Adjusting screws (M5) 870 204 036
with nut
( S ) Adjusting screws (M6) 5870 204 049
with nut
Remove components.
Remove stop plates (see Arrows) and demount the
remaining components.
SPC000007 Transmission and Torque Converter
Page 38
Figure 79
Figure 80
Figure 81
Figure 82