3.2 Installation Environment
Secure sufficient space to allow the robot to move freely. Check the operating space of the robot to
ensure that the robot does not collide with external elements.
Installation Location Check
Before installing the robot, make sure you have enough space and consider the following.
• Install the robot on a firm, even surface.
• Install the robot in a location with no water leakage and constant temperature and humidity.
• Check whether there are flammable and explosive materials near the installation location.
Caution
• Installing the robot in locations other than the recommended locations may result in reduced
robot performance and product life.
To Next Page
Loading...
Need help?
General
