7. Transportation
7.1 Caution during Transportation
Caution
• If the robot is wrapped in packaging materials and transported, store the robot in a dry location.
If the robot is stored in a location with high humidity, condensation may occur inside the
packaging material, resulting in robot defects.
• When relocating the robot, consider the weight of the robot’s link or base and carry the robot
with sufficient personnel at the same time. Especially for H-series, refer to the "Handling Guide"
and make sure to carry it in accordance with the safety regulations of the country.
• The controller is moved by grasping the bottom handle.
• When transporting the robot or controller, make sure to maintain the proper posture. Failure to
do so may result in back injury or other physical injuries.
• When transporting the robot using lifting equipment, make sure to observe all related national
and regional regulations.
• Doosan Robotics does not assume responsibility for any damages or losses that occur during
transportation, so make sure to transport the robot safely according to the user manual.
To Next Page
Loading...
Need help?
General
