Dover Markem-Imaje SmartDate X60 - Operating Modes; Non-Ribbon Save Modes; Ribbon Save Modes

104 10056272-AA
 Operating Modes
SmartDate X60 has one standard mode of operation, with the option to select additional
ribbon save modes if required
These can be separated into two main groups:
 Non-Ribbon Save Modes
Non-Ribbon Save Modes include:
- High Pack Rate - speeds of up to 700 mm/sec
- High speed mode - speeds of up to 1200 mm/sec
 Ribbon Save Modes
Ribbon Saving modes include:
- Radial Ribbon Save Mode
- Interlace Mode
- Cost Saving Mode
The choice of mode will depend on the type of application and the operator’s main
objectives:
- If saving ribbon is the main objective, choose one of the Ribbon Save mode options.
- If print quality or speed is the main objective, choose one of the Non-Ribbon Save
mode options.
A brief explanation of the different modes follows.
Operation
for parts & service call QLC (800) 837-1309