Dover Markem-Imaje SmartDate X60 - Image

Printer configuration
158 10056272-AA
 Image
The Image menu allows you to configure various settings that relate to the image being
printed.
The following Image options can be configured:
Machine ID
Range: 0000 -9999
(Including other characters)
Default: 0000
This allows you to set a four character, unique identification for each
SmartDate X60.
The information is then printed in a specific field on the design.
This allows the same layout design to be used for several printers, with each
printing a unique Machine ID.
The field in the design must be created as a Machine ID field in CoLOS Create
Pro.
See CoLOS Create Pro for details.
Line ID
Range: 1 - 99
Default: 1
This allows you to set a identifying number for the product line that the
SmartDate X60 is being used on.
The information is then printed in a specific field on the design.
The field in the design must be created as a Line ID field in CoLOS Create
Pro.
See CoLOS Create Pro for details.
Default Job
Range: Enabled or Disabled
Default: Enabled
This allows you to enable or disable the Default Job feature.
Relative Year Offset
Range:
Default:
This allows you to set a relative year offset for Japanese Emperor years.
E.g. 1998 will be printed as year 10 and 2004 will be printed as year 16.
Date Rollover Hour
Range: 0 to 11
Default: 0
This allows you to set the hour at which the next day starts.
Date Rollover Minute
Range: 0 to 59
Default: 0
This allows you to set the minute of the hour at which the next day starts.
for parts & service call QLC (800) 837-1309