122 10056272-AA
Low Speed Print Mode
This is a Continuous printer option.
SmartDate X60 Continuous can be set to react in several different ways, if the Host
packaging machine stops during the print cycle.
To access the Low Speed Print Mode setup menu, Printer Configuration - Machine.
The options are:
- None
- Continue
- Reprint
None
This is the Default setting.
In this mode if the Host machine stops during a print cycle, the SmartDate X60 will lift
the printhead and wait for the packaging machine to re-start.
During this time the option to Discard the print will be displayed on the screen.
If the print is not discarded, and the substrate starts to move again, the SmartDate X60
will continue with the print. The image in this case may have a small part of the print
missing, as the printer requires time for the head and the ribbon to move.
Operation
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
