109 10056272-AA
Materials and Applications
High Speed mode is designed for applications where a small reduction in perceived
quality is acceptable so the customer may benefit from high running speeds. Primarily
these applications are for simple Date & Lot type overprinting applications. High Speed
mode can be used to print picket fence orientated barcodes, but must not be used to
print Ladder format barcodes.
As for all applications, the customers material type should always be tested, however
testing has proven SmartDate X60 High Speed mode to work well on various materials
including: Polypropylene, Polythene, Premium labels and Laminated films. High Speed
mode also increases the performance of the SmartDate X60 on “difficult to print on
substrates” and “Harder to adhere ribbons“. High Speed mode will only operate reliably
with Markem-Imaje-approved grades of Thermal Ribbon.
High Pack Rate Mode High Speed Print Mode
Operation
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
