Dover Markem-Imaje SmartDate X60 - Manual Control Functions

Diagnostics
192 10056272-AA
 Ribbon
Function Description
Calibrate Activates the Calibration sequence.
Toggle Ribbon Feed Activates or De-activates the Ribbon Feed sequence.
Start Cycle Test Starts the Print Cycle
Stop Cycle Test Stops the Print Cycle
Print Markem-Imaje Test Pattern Selects and automatically prints the Test pattern
 Printhead
Setting Description
Head Home (Intermittent only) Activates the Head Home sequence.
Toggle Solenoid Power
Activates the Printhead prime solenoid with the cassette
removed. This allows better access to set the printhead
gap.
Toggle Printhead In/Out Activates or De-activates the Printhead In/Out solenoid.
Toggle Printhead Prime
Activates or De-activates the Printhead Prime position
solenoid.
for parts & service call QLC (800) 837-1309