Interface
54 10056272-AA
Security Options
SmartDate X60 can be configured to prompt for a password before access to the vari-
ous menu options is allowed.
Two security level options are available to gain access to the menus.
- Open
- Medium
If the security setting is Open no password prompt will be displayed.
If the security setting is Medium you will be prompted for an access password.
SmartDate X60 is shipped with three default passwords, these are 1111, 2222 and
3333.
The different passwords allow different levels of access.
For example:
The default operator level password 1111 only allows access to Job selection and ad-
justment of the print darkness and print position.
The default supervisor level password 2222 only allows access to the options above
and some additional features such as setting the SmartDate X60 default Date and Time.
The default Installation engineer level password 3333 allows access to all of the avail-
able menu options.
These passwords can be re-configured to allow more options or additional passwords
can be added. This is done from Markem-Imaje CoLOS Control.
Please consult the relevant documentation for details.
for parts & service call QLC (800) 837-1309
To Next Page
Loading...
