Dover Markem-Imaje SmartDate X60 - Master-Slave and Logging Configuration

Printer configuration
172 10056272-AA
 SSCC
This feature allows you to configure the Serial Shipping Container Code parameters.
Setting Description
SSCC Company ID
Range: 1 - 16 digits
Default: 1
This allows you to enetr the allocated Company ID code.
SSCC Current Reference Value
Range: 1 - 16 digits
Default: 1
This allows you to define the current serial number to be used.
SSCC Minimum Serial Reference Value
Range: 1 - 16
Default:
This allows you to define the start value of the incremental number section
of the code.
SSCC Maximum Serial Reference Value
Range: 1 - 16 digits
Default: 1
This allows you to define the end value of the incremental number section
of the code.
SSCC Extension Digit
Range: 0 - 1
Default: 0
This allows you to define the SSCC extension digit.
 External
The External menu allows system Integrators to store information.
Setting Description
General Purpose 1 to 12 The External menu allows system Integrators to store information.
for parts & service call QLC (800) 837-1309